Challenge Coin USA Price List

Custom Coin Price Lists By Size:

1.5" 38mm Coins   1.65" 42mm Coins   1.75" 45mm Coins   2.0" 50mm Coins    Accessories and Upgrades   Art Details

1.5" Challenge Coin (38mm)

1.65" Challenge Coins (42mm)

1.75" Challenge Coins (45mm)

2.0" Challenge Coins (50mm)

Accessories and Upgrades:

Challenge Coins Art Details

2 Tone Challenge Coins
Gold Challenge Coins
Silver Challenge Coins
Antique Bronze Challenge Coins
Antique Silver Challenge Coins
Black Nickel Challenge Coins
Satin Gold Challenge Coins
Copper Challenge Coins
Print Challenge Coins
Print	No Print	Print	No Print
Epoxy Challenge Coins
Epoxy	No Epoxy	Epoxy	No Epoxy
Challenge Coin Diamond Cuts:
Wave Cut
Flat Cut
Petal Cut
Rope Cut
Rope Edge
Engraving (Sequential Numbering)
2D / Raised Letters vs. 3D / Recessed Letters
Sand Blasting
Key Chains
Odd Shape Challenge Coins

Cloisonne:

Cloisonne lapel pins have the greatest perceived value and a jewelry-like finish. It is said that cloisonne can be preserved for 100 years without fading because it is derived from mineral ore. This ancient art that developed over thousand years in China requires meticulous handcrafted details. The custom designed pins are formed to a copper bronze surface, and then hand-filled with colored cloisonne paste. The pins are then kiln-fired at 800 degrees centigrade. More color is added, the pins are fired again. These steps ensure bleeding of colors do not occur. After firing, each pin is hand-polished and plated to give hard and smooth enamel, which is resistant to scratching. Owing to hard durable finish, cloisonne is best suited to make military badges, car badges, and athletic medals. They are also ideal for recognitions, achievement awards and important events.

No die fee for order over 500 Pins.
No S&H.
Free Art work.
Standard thickness 0.8mm for all sizes.
For every additional 0.2mm add $0.10 per pin for 3/4" & 1"
For every additional 0.2mm add $0.15 per pin for 1.25" & 1.50"
Cut die charge $20 extra per each hole - no extra for orders over 500 pins

Stamped Soft Enamel:

The soft enamel is the most popular type of custom made lapel pins because it offers brilliant colors and fine raised metal detailing. Soft enamel pins are die struck from a copper bronze surface, then hand-filled with softer enamel on the recessed areas of customized pins. The pins are kiln-baked at 160 degrees centigrade to seal the colors. Once done, the custom designed pins are individually hand-polished and plated for a very distinguished look. Fine metal detailing and high-quality finishing bring out your designs boldly and shapely. The type of pin is an outstanding product at a very affordable price. They are excellent choice for events and product promotions. Another option with die struck soft enamel is to apply an epoxy dome for protecting soft enamel colors.

No die fee for order over 500 Pins.
No S&H.
Free Art work.
Standard thickness 1.2mm or 1.6mm depending on the sizes.
For every additional 0.2mm add $0.10 per pin for 3/4" & 1"
For every additional 0.2mm add $0.15 per pin for 1.25" & 1.50"
Cut die charge $20 extra per each hole - no extra for orders over500 pins.
Sequential numbering $0.05 per stamped number.
We always measure the size by with & height, not by diagonal.

Photo Etched Soft Enamel:

Same principle as pictures taken by camera, photo etched soft enamel is manufactured by taking an image of your design and transferring it from film onto the surface of a sheet of metal. Your design is then etched into the bronze or stainless or aluminum using an acid etching process. Then all of the acids and other impurities are carefully cleaned from the surface. The indentations created by the acid etching process are then filled with the enamel colors. Each color is applied by hand, one at a time, using different sized syringes. The sheet of metal is then fired at 160 degrees centigrade for 15 minutes. The lapel pins are then cut from the metal sheet according to your custom design. Non-colored (raised) sections of the pins are then plated and brushed to a shiny finish. An optional epoxy protective coating (dome) can then be applied to protect the color enamels from being scratched or damaged.

No die fee for order over 500 Pins.
No S&H.
Free Art work.
Standard thickness 0.8mm for all sizes.
For every additional 0.2mm add $0.10 per pin for 3/4" & 1"
For every additional 0.2mm add $0.15 per pin for 1.25" & 1.50"
Cut die charge $20 extra per each hole - no extra for orders over 500 pins.
Sequential numbering $0.05 per stamped number.
We always measure the size by with & height, not by diagonal.

Patches by Challenge Coin USA

PATCH SIZE

The size of your custom embroidered patch is adding
the length plus the with and then dividing it by 2.

Width 3.5" + Height 3.5" = 7" ÷ 2 = 3.5"